PRVG-11250 : The check "RPM Package Manager database" was not performed because

By


Following message reported from cluvfy while performing pre-requisite for Clusterware Installation:

 Verifying RPM Package Manager database ...INFORMATION

PRVG-11250 : The check "RPM Package Manager database" was not performed because

it needs 'root' user privileges.


SOLUTION

Execute runcluvfy manually with "-method root" option and enter root password when prompted :

Example:

$/runcluvfy.sh stage -pre crsinst -n <HOSTNAME1>,<HOSTNAME2> -method root

Enter "ROOT" password:

For reference metalink doc id : 2548970.1

Comments

Post a Comment

Popular posts from this blog

How to drop index and before dropping it how to get the DDL.

By
  Oracle DROP INDEX statement DROP INDEX [schema_name.]index_name; DECLARE index_count INTEGER; BEGIN SELECT COUNT(*) INTO index_count FROM USER_INDEXES WHERE INDEX_NAME = 'index_name' ; IF index_count > 0 THEN EXECUTE IMMEDIATE 'DROP INDEX index_name' ; END IF; END; / In case want to check whether index exists and then delete it. If try to drop a non-existing, you will get the following error: SQL Error : ORA -01418 : specified index does not exist In SQLplus, set these before running the commands set long 100000 set longchunksize 100000 select DBMS_METADATA.GET_DDL( 'INDEX' , 'index_name') from all_indexes where owner in ( USER , 'USER_OTHER_THAN_LOGGED_IN_USER' ); Use below script to fetch metadata other information. SELECT DBMS_METADATA,GET_GRANTED_DDL('SYSTEM_GRANT','SSO******') from dual;
Read more

ORA-00257:archiver error, connect internal only until freed

By
  Issue: Application log shows below error and users are unable to connect to the database. 0RA-00257:archiver error, connect internal only until freed (OR) 0RA-00257:archiver error, connect internal only until freed ORA-16020: less destinations available than specified by LOG_ARCHIVE_MIN_SUCCEED_DEST Fix: 1) Check if there are any errors for the archive destination(s). Make sure that the number of VALID archive destinations is greater than or equal to the value specified by LOG_ARCHIVE_MIN_SUCCEED_DEST initialization parameter. set pages 1000 col dest_name for a30 col destination for a60 SELECT dest_id, dest_name, binding, status, destination, error FROM v$archive_dest; SHOW PARAMETER log_archive_min_succeed_dest 2) If space is full in one or more of the archive destinations (or if destination is not available), take any of the following steps: 2.a) Manually move the archives to another location and delete them from archive destination.   (OR) 2.b) Change the archive des...
Read more

How to set up the Oracle Wallets in Oracle Database 19C

By
  The Oracle Wallet is a container or repository that stores authentication and credentials such as certificates, certificate requests, and private keys., By using this we can connect to database without providing the schema name & password, Password will be connected by using the TNS ALIES name & hence the schema are encrypted & stored in the oracle wallets. Let us configure the schema password by using the wallets. Create a directory to store the wallets. Create a directory to store the password $ mkdir -p /u01/app/wallets Create a wallet & provide the wallet password. $ mkstore -wrl /u01/app/wallets/ -create Enter password: ********* Enter password again: ******** $ ll total 8 -rw-------. 1 oracle oinstall 194 Nov 1 14:38 cwallet.sso -rw-------. 1 oracle oinstall 0 Nov 1 14:38 cwallet.sso.lck -rw-------. 1 oracle oinstall 149 Nov 1 14:38 ewallet.p12 -rw-------. 1 oracle oinstall 0 Nov 1 14:38 ewallet.p12.lck Check the status of listener $lsnrctl status listener_n...
Read more

Linux OL7/RHEL7: PRVE-0421 : No entry exists in /etc/fstab for mounting /dev/shm

By
  This is due to below bugs: OL7 -  Unpublished Bug 21441387- 12.2/MAIN/OL7.1: CVU REPORTS /DEV/SHM NOT MOUNTED WHEN IT IS MOUNTED  21441387.8 RHEL 7 - Unpublished Bug 25907259 : RHEL7.2: CVU REPORTS /DEV/SHM NOT MOUNTED WHEN IT IS MOUNTED  25907259.8 As a work-around in OL7: In OL7, the /dev/shm is not mounted in /etc/fstab on a fresh system, it is done in: [root@testc140 u02]# ll /usr/lib/dracut/modules.d/99base/init.sh -rwxr-xr-x. 1 root root 11379 Mar 26 10:14 vi /usr/lib/dracut/modules.d/99base/init.sh and comment the below lines 62 if ! ismounted /dev/shm; then 63 mkdir -m 0755 /dev/shm 64 mount -t tmpfs -o mode=1777,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null 65 fi so, this validation is not really valid for OL7.    We can also safely ignore this message. For reference metalink id: -  Doc ID 2065603.1
Read more

Verifying Daemon “Avahi-Daemon” Not Configured And Running …FAILED (PRVG-1360)

By
  Execute "/tmp/CVU_19.0.0.0.0_grid/runfixup.sh" as root user on nodes "shsebs7idb1" to perform the fix up operations manually Press ENTER key to continue after execution of "/tmp/CVU_19.0.0.0.0_grid/runfixup.sh" has completed on nodes "shsebs7idb1" Fix: Daemon "avahi-daemon" not configured and running   Node Name                             Status   ------------------------------------  ------------------------   shsebs7idb1                           failed ERROR: shsebs7idb1: PRVG-9023 : Manual fix up command "/tmp/CVU_19.0.0.0.0_grid/runfixup.sh" was not issued by root user on node "shsebs7idb1" Result: "Daemon "avahi-daemon" not configured and running" could not be fixed on nodes "shsebs7idb1" SOLUTION: To fix this error, stop and disable avahi-daemon service. 1. Check avahi-daemon status: [root@shsebs7idb1 ~]# ls -...
Read more

SKIP DNS RESLOV.CONF CHECK DURING RAC CONFIGURATION

By
 shsebs7idb1: PRVG-2064 : There are no configured name servers in the file              '/etc/resolv.conf' on the nodes "shsebs7idb1" Solution: [root@shsebs7idb2 ~]# ls -ltr /etc/resolv.conf -rw-r--r--. 1 root root 78 Jul  3 11:02 /etc/resolv.conf [root@shsebs7idb2 ~]# mv /etc/resolv.conf /etc/resolv.conf.sid Rename resolv.conf to resolv.conf.sid for example and re run the installation again . It  worked for me
Read more

How to write to a CSV file using Oracle SQL*Plus

By
  SPOOL command  The  SPOOL  command is  unavailable  in the browser-based SQL*Plus version,  iSQL*Plus . To generate files while using iSQL*Plus, change the necessary preference settings to directly output to a file. This is accomplished using the  SPOOL  statement. While  SPOOL  is  active , SQL*PLus will store the output of any query to the specified file. Therefore, the next command to enter is  spool : spool filepath Skipping ahead slightly,  after  your query is inserted, you also need to halt  spool  so the file output is closed by using the  spool off  command: spool off Insert the query  The last step after the settings are modified and  spool  is running is to insert your query. For our simple example, we’re outputting all books from our  books  table. SELECT   title,   author FROM   authors; Don’t forget the semi...
Read more

CPU Patch Analysis

By
 Oracle CPU patch analysis Identifying the Latest Critical Patch Update for Oracle E-Business Suite Release 12.2 (Doc ID 2484000.1) Database Quick-Link If you only care about the database patches, this MOS note steps you through really easily. Assistant: Download Reference for Oracle Database/GI Update, Revision, PSU, SPU(CPU), Bundle Patches, Patch sets and Base Releases (Doc ID 2118136.2) https://www.oracle.com/security-alerts/ Critical Patch Updates Critical Patch Updates provide security patches for supported Oracle on-premises products. They are available to customers with valid support contracts. Starting in April 2022, Critical Patch Updates are released on the third Tuesday of January, April, July, and October (They were previously published on the Tuesday closest to the 17th day of January, April, July, and October). The next four dates are: 16 April 2024 16 July 2024 15 October 2024 21 January 2025 A pre-release announcement will be published on the Thursday preceding eac...
Read more

Change Password in an Oracle Database

By
 Once connected, ALTER USER command, specifying the new password. ALTER USER myuser IDENTIFIED BY MyNewPassword; To use special characters, remember to enclose the password in double quotes. ALTER USER myuser IDENTIFIED BY "MyNewPassword#"; SQL*Plus and SQLcl Use the PASSWORD command from the SQL*Plus and SQLcl utilities. It will be prompted for your current password and the new password. SQL> password Changing password for MYUSER Old password: ******** New password: ******** Retype new password: ******** Password changed SQL> SQL Developer From SQL Developer Right-click on the connection. Select the "Reset Password..." option from the popup menu. In the subsequent dialog, enter the current password and the new password with confirmation. Click the OK button. TOAD For TOAD do the following. select "Session > Change Password". In the subsequent dialog, enter the current password and the new password with verification. Click the OK button.
Read more